How to Use:
1. Verify that the upper thread and spool are properly installed. 2. Turn the handwheel toward you (counterclockwise), raise the handle and pointer to the highest position.
3. Turn the pattern selection knob to select a stitch pattern.
4. Raise the presser foot and place the fabric under the presser foot.
5. With the handwheel toward you (counterclockwise), lower the needle to where you want to start sewing.
6. Lower the presser foot and fix the fabric.
7. Make sure the foot pedal auto switch is set and the adapter is plugged in.
8. Start sewing again while lightly pressing the fabric.
9. After sewing is completed, turn the handwheel toward you (counterclockwise), raise the needle and thread take up lever, and raise the high pressure foot.
10. Take the fabric off and cut the thread with a thread cutter.