Waterproofing: Guaranteed to stop water and withstands up to 10 PSI of hydrostatic pressure, equivalent to a 22-foot high wall of water.
Surfaces: It is ideal for use on interior and exterior, above or below grade masonry walls, including concrete, cinder and concrete blocks, stucco, and brick. It can even be used for fish ponds and birdbaths, provided it is allowed to cure for the recommended 5–7 days.
Preparation: Surfaces must be clean, free from dirt and oil, and cracks should be patched with a product like DRYLOK Fast Plug hydraulic cement.
Coats: A minimum of two coats is required for the warranty to apply.
Dry Time: It is dry to the touch in about 90 minutes and can be recoated in 2-3 hours. A quality latex topcoat can be applied after 24 hours for decorative purposes.